Line production converter can be defined as a small expedient that converts high-voltage speaker-level signals to preamp-level signals; which is standard to an amp. If u want to join together an amp to your car stereo which doesn't have a speaker level inputs then it means you need a line production converter to have a preamp outputs. So you can join together your receiver to an amp by converting your receiver's speaker production into preamp-level signals. It consists of a transformer and (10 to 20 watts) a high-voltage resistor and connects to amp by using Rca patch cable. The amplifier in the head unit is being loaded by the resistor. It has also an adjustable gain feature to pull output.
Most of the line production converters have wire to ground the transformer. When the head unit is "on" the voltage on the production speaker wires, is approximately half of the Dc battery and changes rapidly when it is "on". Whereas, when the unit is "off", the voltage is 0 volt Dc. As we already said, that the head unit's outputs has a large quick increase in Dc voltage when the head unit is turned on. The transformer will contribute the variation of voltage in the middle of the two input terminals. Since the Dc voltage increases at the same time on both the input terminals, then the rhythm of the Dc is irrecoverable. There are distinct types of Line production Converters available in the market but Gizmo Peripheral is remained the industry leader in high ability Loc's.
There are straightforward Instructions for the line production converters which need to take in consideration. So join together the audio cable speaker's leads to the expedient from the car stereo. The line production converter then trims down all the inwards bound speakers' level audio signals until the outgoing signals get adjusted to the preamp inputs on the amplifier. An adaptor scosche performs many distinct applications. It accepts speaker level outputs and converts them to preamp level outputs. It has a fader control feature also that means; we can hook 2 channel amplifier or 4 channel amplifier for real and can not lose any fader control.
Adjustable line production converters helps to convert the radio speaker level production to the lower amplifier Rca level input. Installers use to convert their speaker level stereo to Rca levels with the help of Hi/low adaptors which hooks to an external car stereo amplifier. Hi/low converter with 2 channels and 4 channels are also available with or without adjustments. It is important to note that the match in the middle of your car stereo and amplifiers are the same. Adjustable hi/low converters allow to fine tune the hi/low expedient to match levels in the car and are the most popular in adjustable production converters. There are many adjustable production converters in 2 channels and 4 channels available. For example, Soundgate "Loc A" adjustable high carrying out Hi/Low adaptor features full Dc isolation and handles 40 watts and Soungate "Xr4", this performs dual functions such as to add an aftermarket receiver to a factory amplifier principles or to add four channel amplifiers to a factory receiver. This feature can make adjustments on all four channels.
Car Stereo Line output Converter